Concrete Circular Saw

We are a professional Taiwan-based company that deals in manufacturer, exporter and supplier Concrete Circular Saw with an extensive range. We have high qualified and dedicated workforce which assures you of on-time delivery of high quality products. If you are interested in any styles, please feel free to contact us.
Our

Concrete Circular Saw

available in various specifications, are known for fine finishing, corrosion resistance and durability. These cost-effective products are in line with the defined industry standards.
  • Concrete Circular Saw - C14
Concrete Circular Saw
Model - C14
Concrete Saw C14
C14
INTRODUCTION
This machine is equipped with two handles and a blade guard. The motor has overload and overheat protection. It has an integrated water feed system as required for diamond cutting and has a portable residual current device (PRCD) for electrical safety. It is used primarily with diamond blades, but abrasive wheels may also be used with this machine. It is intended for cutting masonry, stone, concrete, reinforced concrete and similar materials. All other uses are prohibited.
LIST OF CONTENTS
• Concrete Saw
• Guide Roller Assembly
• M17 Combination Wrench
• Splash Guard
ASSEMBLY
• Mount the blade. ( See below “Mounting the Blade”)
• Mount the Guide Roller Assembly if desired ( See below “Guide Roller Assembly”)
• Mount the blade guard brush (See below "Blade Guard Brush" for assembly instructions)
• Mount the splash guard (See below "Splash Guard" for assembly instructions)
355 mm (14”) handheld wet or dry diamond saw with 2800 W motor for up to 125 mm depth of cut. Ideal for in-door cutting.
  • LED Indicator Indicates load conditions (electronic & thermal protection).
  • Integrated water feed system with fine adjustable flow and quick release coupling.
  • Tool-free detachable guide rollers for perpendicular cuts and reduced operator fatigue.
  • Tool-free detachable splash guard.
  • Tool-free blade guard angle adjustment. Handles designed for optimal control.
  • Vacuum port for dust or slurry collection with cap.
  • Quick removable brush for slurry.
  • Externally accessible brushes.
Power:
2800 W (220 V) | 1700 W (110 V)
Max. Capacity:
125 mm Depth of Cut
Type:
Wet or Dry
Enquiry Now
Products List
Concrete Chainsaw CS11 CS11 INTRODUCTION This tool is specifically designed for wet cutting of concrete, masonry and similar materials. It must not be used for cutting wood or felling trees. Although it is similar in appearance to a wood chain saw, it has significant differences in principles and techniques which will be detailed throughout this instruction manual. . This chain saw must not be converted or modified for any other use, other than as specified in these operating instructions. The user shall be liable for damages and accidents due to incorrect use. INSTALLING THE GUIDE BAR AND CHAIN 1. With the 2 side cover nuts removed and the side cover removed, slacken the tension adjustor by turning anticlockwise. 2. Slip the guide bar into position over the studs with the hole engaged with the adjustor pin. (the bar is symmetrical and may be installed with either side up) 3. Place the chain around the drive sprocket first, ensuring that the drive links engage the sprocket teeth. 4. Starting from the drive sprocket end, loop the chain around the guide bar nose sprocket, ensuring that the drive links engage with the guide bar groove and remain engaged with the sprockets. 5. Place the side cover in position and thread on the 2 side cover nuts, leaving them finger tight only (to allow the tension adjustor to be adjusted). They will be tightened fully after tensioning according to the instructions below. Concrete chainsaw with single phase 3200 W motor and up to 300 mm plunge cutting depth. Excellent for precise corner cut outs with no overcuts. LED Indicator Indicates load conditions (electronic & thermal protection). Bumper Spike for increased leverage. Flexible Splash Flap helps contain slurry. Dual plane horizontal and vertical spirit levels for precise alignment. Wide base for setting tool down and adjusting. Hall Effect Switch is completely waterproof and dustproof. Power:3200 W (220 V) | 3000 W (110 V) Max. Capacity:300 mm Depth of Cut Type:Wet only
Concrete Saw C16 C16 Introduction & Target Group This saw is an indispensable tool for concrete cutters, construction professionals, or anyone who needs to cut reinforced concrete, especially indoors. Its 3200 W motor provides the power for the fastest possible cutting and its electronic controls grant excellent performance, motor protection, and operator useability. It incorporates a variety of useful features to maximize work efficiency.     Applications This saw is a concrete cutter’s go-to tool, being the fastest and most economical solution in most situations. It uses a 16” blade for up to 150 mm depth of cut. With the required flange and blade, it is also capable of flush cutting. The tool can perform wet cutting as well as dry cutting and can use the highly effective dust skid.  Being electric, this tool is essential for any indoor cutting applications, especially in basements, where the more common petrol cutters are strictly not allowed. Another big advantage of electric over petrol is for applications when the saw is needed to make a series of quick cuts, with other work needed to be done in between each cut. In such conditions, it’s very inconvenient to be restarting the petrol engine each time another cut is needed.      The C16 is the essential tool in any concrete cutter’s arsenal.  405 mm handheld wet or dry concrete saw with 3200 W motor for up to 150 mm depth of cut. Ideal for in-door cutting. LED Indicator Indicates load conditions (electronic & thermal protection). Integrated water feed system with fine adjustable flow and quick release coupling. Tool-free detachable guide rollers for perpendicular cuts and reduced operator fatigue. Tool-free detachable splash guard. Tool-free blade guard angle adjustment. Handles designed for optimal control. Vacuum port for dust or slurry collection with cap. Quick removable brush for slurry. Externally accessible brushes. Power:3200 W (220V) | 3000 W (110V) Max. Capacity:150 mm Depth of Cut Type:Wet or Dry Dry Capacity:123
High Frequency Concrete Chainsaw CS18 + P8K Power Converter CS18 Introduction & Target Group This saw, together with its P8K Power Converter, is an indispensable tool for professional concrete cutters. Its 6200 W, PMSM motor has significantly higher 90% efficiency than the induction type motors used by competitors, providing the necessary power to easily drive long guide bars. Its electronic controls grant excellent performance, motor protection, and operator useability. It incorporates a variety of useful features to maximize work efficiency, especially its tool-free chain tensioning system and dual-plane spirit levels. The P8K Converter is unique in the industry in having 32A input capacity, allowing far higher power on single phase supply than the 16A of competitors’ converters. Applications Concrete chainsaw with 6500 W high frequency permanent magnet synchronous motor. Excellent for deep plunge cuts and precise corner cut outs with no overcuts. ‍A concrete chainsaw has unique capabilities, being able to perform many types of cuts in reinforced concrete which are not possible with any other method. It allows corners to be cut cleanly, with no overcuts. It also allows very small cutouts to be made, as small as the width of the guide bar. With patience and skill, it is even possible to make curved cuts. Its special design allows very near to flush cuts. And of course, depending on the guide bar used, it enables very deep depths of cut, achieving an impressive 470 mm with a 19” bar. When a special concrete cutting challenge is encountered, the CS18 wins the day. Constant speed is maintained regardless of load. LED Indicator Indicates load conditions (electronic & thermal protection). Bumper Spike for increased leverage. Flexible Splash Flap helps contain slurry. Dual plane horizontal and vertical spirit levels for precise alignment. Wide base for setting tool down and adjusting. Special design allows very close to flush cutting. Tool-free bar clamp lever for faster chain tension adjustment. Special Motor Coupling Cable. Hall Effect Switch is completely waterproof and dustproof. Power: 6500 W (3~ 380-480 V) | 5500 W (1~ 230 V @ 32A) | 3600 W (1~ 230 V @ 16A) Max. Capacity:470 mm Depth of Cut Type:Wet only
High Frequency Concrete Saw C18 + P8K Power Converter C18 Introduction & Target Group The C18, together with its P8K Power Converter, is an indispensable tool for professional concrete cutters. Its 6200 W high frequency motor provides the power for the fastest possible cutting and its electronic controls grant excellent performance, motor protection, and operator useability. It incorporates a variety of useful features to maximize work efficiency. Applications The C18 is a concrete cutter’s go-to tool, being the fastest and most economical solution in most situations. It uses a 457 mm (18") blade for up to 175 mm depth of cut. The added depth of cut allows the operator to perform certain cuts not possible with a 16" blade. With the required flange and blade, it is also capable of flush cutting. The C18 is the essential tool in any concrete cutter’s arsenal. 457 mm (18") wet concrete saw with 6500 W high frequency permanent magnet synchronous motor for up to 150 mm depth of cut. With flush cut capability. LED Indicator Indicates load conditions (Electronic &Thermal protection). Constant speed is maintained regardless of load. Integrated water feed system with fine adjustable flow and quick release coupling. Tool-free detachable guide rollers for perpendicular cuts and reduced operator fatigue. Tool-free detachable splash guard. Tool-free blade guard angle adjustment. (C406) Hall Effect Switch is completely waterproof and dustproof. Handles designed for optimal control. Quick removable brush for slurry Power: 6500 W (3~ 380-480 V) | 5500 W (1~ 230 V @ 32A) | 3600 W (1~ 230 V @ 16A) Max. Capacity:175 mm Depth of Cut Type:Wet
High Frequency Concrete Saw C406 + P8K Power Converter C406 406 mm (16”) concrete saw with 6500 W high frequency permanent magnet synchronous motor for up to 150 mm depth of cut. Flush cut capability. LED Indicator Indicates load conditions (electronic & thermal protection). Constant speed is maintained regardless of load. Integrated water feed system with fine adjustable flow and quick release coupling. Tool-free detachable guide rollers for perpendicular cuts and reduced operator fatigue. Tool-free detachable splash guard. Tool-free blade guard angle adjustment. Hall Effect Switch is completely waterproof and dustproof. Handles designed for optimal control. Quick removable brush for slurry Power: 6500 W (3~ 380-480 V) | 5500 W (1~ 230 V @ 32A) | 3600 W (1~ 230 V @ 16A) Max. Capacity:150 mm Depth of Cut Type:Concrete Saw
High Frequency Ring Saw R16 + P8K Power Converter R16 405 mm (16") wet ring saw with 6500 W high frequency permanent magnet synchronous motor for up to 300 mm depth of cut. Patented One Step Drive Tensioner makes fast and easy blade adjustment and keeps tension equalized. Change saw blade quickly and without disassembly of the cover. High Stability Guide Roller design keeps the blade stable and centralized when beginning the cut. LED Indicator Indicates load conditions (electronic & thermal protection). Flexible upper and bottom splash guards prevent splashing slurry. Hall Effect Switch is completely waterproof and dustproof. Water feed system with fine adjustable flow and quick release coupling. Power: 6500 W (3~ 380-480 V) | 5500 W (1~ 230 V @ 32A) | 3600 W (1~ 230 V @ 16A) Max. Capacity:300 mm Depth of Cut Type:Wet only
Ring Saw R13 R13 330 mm (13") wet ring saw with 3200 W universal motor for up to 220 mm depth of cut. Patented One Step Drive Tensioner makes fast and easy blade adjustment and keeps tension equalized. Change saw blade quickly and without disassembly of the cover. High Stability Guide Roller design keeps the blade stable and centralized when beginning the cut. LED Indicator Indicates load conditions (electronic & thermal protection). Flexible upper and bottom splash guards prevent splashing slurry. Hall Effect Switch is completely waterproof and dustproof. Water feed system with fine adjustable flow and quick release coupling. Externally accessible brushes. Power:3200 W (220 V) | 3000 W (110 V) Max. Capacity:220 mm Max. Cutting depth Type:Wet
Stone Cutting Circular Saw SCS7 SCS7 A 180 mm wet stone saw with 55 mm depth of cut and 1800 W motor. Use the optional guide rail for precise control. Depth Scale for control of cut. Parallel Guide for straight cuts. Sighting Notches for accurate cutting. Anti-friction Strips for smooth cutting action. Optional Guide Rail for precise control of the cutting process. Power:1800 W (220 V) | 1680 W (110 V) Max. Capacity:55 mm Depth of Cut Type:Wet or dry stone saw
Wet Tile Saw TS9 TS9 A 230 mm professional grade, high precision wet tile saw with unique water recirculation design. 48 mm depth of cut. 45° bevel cut capability. Easy Miter adjustment miters up to 45 degrees. Easy mounting 1.5 L water tray. Quick-release table mountings. Quick tool-free removal of the table for easy cleaning and blade eplacement. Rugged, stable, and easy-to-clean table with cutting scale. Micro-adjustable cutting guide always remains parallel. Angle Guide Plate holds work pieces at various angles. Power:800 W Max. Capacity:48 mm Depth of Cut Type:Table top wet tile saw