Dry Diamond Core Drill

LEE YEONG INDUSTRIAL CO., LTD. is a professional manufacturer, supplier and exporter that is concerned with the appearance, development and production of Dry Diamond Core Drill. We are located in Taiwan, with convenient transportation access. All of products are strict checked by our professional employee.
Mesmerizing in designs, we have for our clients high grade

Dry Diamond Core Drill

products. They come in bright color combinations that make them an eye catching look.
  • Dry Diamond Core Drill - DME52D
Dry Diamond Core Drill
Model - DME52D
Dry Diamond Core Drill Motor DME52D
DME52D
DME52D Introduction
The DME52D is a versatile two-speed dry drilling motor with soft percussion. Differentiating it from its brother, the DM52D, the DME52D has external dust collection for drilling highly abrasive materials.
Target Group & Applications
Area using kalksandstein (silicate stone) as building material (mainly in Holland & Germany).
The dust created by kalksandstein is very thin, and it can go into the gear box when soft impact is applied.This tool will be suitable for plumbers, HVAC installers, electricians, and more. The external dust extractor feature is specially designed for area where silicate stone (kalksandstein) are applied, mainly in Netherlands and Germany.
A compact, high efficiency 2 speed 1800 W drilling motor for dry drilling up to 222 mm. Suitable for drilling of highly abrasive materials. Switchable soft percussion allows optimal dry drilling performance.
  • Gear box with mechanical clutch.
  • Smart Electronic Control with soft-start, thermal protection, and overload protection.
  • Switchable soft percussion for optimized dry drilling.
  • Side Handle in-line with spindle centerline for best control.
  • Built in horizontal levels for precision.
  • External Dust Extractor Head for use with 50 to 82 mm banana slot type bits (Optional).
  • Spring-loaded Centering Pilot for L 85 mm bits or for L 65 mm bits. (Optional).

Power:1800 W
Max. Capacity:Dry: 222 mm
Type:Dry drilling (brick)
Enquiry Now
Products List
Diamond Core Drill Motors DM5P, DM5D DM5P, DM5D A compact, high efficiency 2 speed 1800 W wet drilling motor for drilling up to 132 mm. 2 speed Gear Box with clutch. Smart Electronic Control with thermal protection and overload protection. Side Handle in-line with spindle centerline for best control. Built in horizontal levels for precision. Power:1800 W Max. Capacity:Wet: 132 mm Type:Wet drilling  
Diamond Core Drill Motors DM9, DM10, DM12 DM9, DM10, DM12 INTRODUCTION This machine is for the intended purpose of diamond core drilling of concrete, masonry, stone and similar materials. It must always be mounted on a drilling stand. This machine is for professional use only and only trained personnel may operate this machine. All other uses which are not for the intended purpose are prohibited.  It is equipped with a water feed system which is required for the diamond core drilling process. A PRCD interrupter (portable residual current device) which must be used at all times. It is equipped with a three or a four speed mechanical gearbox for different core drill size ranges and features a mechanical safety clutch. The motor has electronics for soft start, overload protection and thermal (overheating) protection. There is a overload warning to alert the operator of load and overload conditions. The machine is equipped with spirit levels which aid in aligning the tool. Use the Tubular Level for horizontal aligning. Use the Bull's Eye Level for vertical aligning. High efficiency 3 speed, 3500 W rig-mounted drilling motors with aluminum body. Three models with optimized gearing for different drilling requirements. Choose the version which best suits your drilling needs. Sturdy 3 speed and 4 speed Gear Box with oil bath lubrication and mechanical clutch. Advanced Electronic Control with soft-start, thermal protection, and overload protection. Surge Function lets the operator easily know that the motor is near overload conditions by pulsing the motor without actually tripping out. Slow-Start function, a unique automatic hole starting function that reduces motor speed for a short time to allow the kerf to be started. LED indicator for optimizing drilling efficiency with overload and overheat warning. Aluminum housing for better cooling and durability. Anti-seize ring to keep core bits from getting stuck on the spindle. Quick-replaceable water seals. Power:3500 W /16 A (220 V) | 2800 W / 25 A (110 V) Max. Capacity:250 mm | 300 mm | 350 mm Type:Wet drilling
Diamond Core Drilling Motor DD160 DD160 Special diamond core drill for dry drilling reinforced concrete. 2200 W motor with 2-speed, oil-bath gearbox featuring percussion function. Enjoy the convenience of dry drilling reinforced concrete without slurry! Excellent for overhead drilling. Keeps diamond segments sharp and assists the general efficiency of the dry drilling process. LED load indicator is large, bright, and in the most visible position, to give the operator reliable guidance on load conditions. Hall Effect Switch is completely dustproof, and is even waterproof. Includes anti-restart function. Oil bath, 2-speed gearbox with mechanical clutch for heavy-duty use. Standard equipment anti-seize ring prevents the bit from becoming stuck on the spindle. Spirit level allows operator to create precisely aligned holes. Power:2200 W (230 - 240 V) | 2000 W (220 V) | 1700 W (110 - 120 V) Max. Capacity:162 mm (Reinforced Concrete) | 262 mm (Brick) Type:Dry drilling (reinforced concrete) | Dry drilling (brick)
Dry / Wet Diamond Core Drill Motors DM52D, DM52P DM52D, DM52P INTRODUCTION The machine is equipped with a tubular spirit level to aid in aligning when drilling horizontally. By positioning the machine so that the bubble is in the center of the window one can drill a straight hole. This machine is for the intended purpose of diamond core drilling of concrete, masonry, stone and similar materials. It may also be mounted on a rig (drilling stand). All other uses which are not for the intended purpose are prohibited. It is equipped with a two speed gearbox. All models are equipped with a mechanical safety clutch. All models have electronics for soft start, overload protection, thermal protection.  Features 2 speed gearbox with clutch for a wide range of sizes. Electronic motor management with soft start, overload and thermal protection. Horizontal spirit level for precise alignment. Switchable soft percussion for optimized dry drilling. Side handle in-line with spindle centerline for best control. Light, high efficiency 1800 W, 2-speed coring motors for dry drilling up to 222 mm and occasional wet drilling up to 82 mm. 2 speed gearbox with clutch for a wide range of sizes. Electronic motor management with soft start, overload and thermal protection. Horizontal spirit level for precise alignment. Switchable soft percussion for optimized dry drilling. Side handle in-line with spindle centerline for best control. Power:1800 W Max. Capacity:182 mm (dry) | 82 mm (wet) Type:Dry drilling (brick) | Wet drilling
Dry Diamond Core Drill Motor DME51D DME51D INTRODUCTION The machine is equipped with a tubular spirit level to aid in aligning when drilling horizontally. By positioning the machine so that the bubble is in the center of the window one can drill a straight hole. This machine is for the intended purpose of diamond core drilling of concrete, masonry, stone and similar materials. It may also be mounted on a rig (drilling stand). All other uses which are not for the intended purpose are prohibited. All models are equipped with a mechanical safety clutch. All models have electronics for soft start, overload protection, thermal protection. OPERATING INSTRUCTIONS Mounting the core bit CAUTION: Ensure that the threads of the spindle and the core bit match. Attempting to mount mismatched threads will result in damage to both threads. Ensure both the core bit and the machine spindle are clean. Any debris could cause excessive run-out of the mounted core bit. Excessive run-out can cause premature failure of the core bit and/or a safety hazard. Tighten the bit to the spindle using two wrenches. Choosing the correct core bit for the job Ensure that the bit you are using is suitable for the material you are drilling. There are two main types of diamond core bit: Dry bits and wet bits. This machine should only be used with dry bits. DRY DRILLING Dry drilling is a different process from wet drilling. When dry drilling, you must not push too hard. Allow the tool to work at its own pace. Dry drilling is normally done in softer materials. Note that in very hard materials it may not be possible to drill dry. A compact, high efficiency 1 speed 1800 W dry drilling motor for drilling up to 112 mm. Suitable for drilling of highly abrasive materials. Switchable soft percussion allows optimal dry drilling performance. Gear box with mechanical clutch. Smart Electronic Control with soft-start, thermal protection, and overload protection. Switchable soft percussion for optimized dry drilling. Side Handle in-line with spindle centerline for best control. Built in horizontal levels for precision. External Dust Extractor Head for use with 50 to 82 mm banana slot type bits (Optional). Spring-loaded Centering Pilot for L 85 mm bits or for L 65 mm bits. (Optional). Power:1800 W Max. Capacity:Dry: 112 mm Type:Dry drilling (brick)
Dry Diamond Core Drill Motor For Reinforced Concrete DM62 DM62 A heavy-duty 2 speed 2000 W dry drilling motor for drilling up to 162 mm in reinforced concrete and 262 mm in brick. Excellent for overhead drilling, operation in sub-zero temperatures and any situation where water cannot be used. Through-the-spindle dust extraction and switchable soft percussion allow optimal dry drilling performance. 2 Speed Gear Box with clutch. Smart Electronic Control with soft-start, thermal protection, and overload protection. All metal construction for optimized cooling, durability, and maximum strength. Switchable soft percussion for optimized dry drilling. LED indicator for optimizing drilling efficiency with overload and overheat warning. Hall Effect Switch is completely waterproof and dustproof. Anti-seize ring to keep core bits from getting stuck on the spindle. Side Handle in-line with spindle centerline for best control. Built in vertical and horizontal levels for precision. Power:2200 W (230-240 V) | 2000 W (220 V) | 1700 W (110-120 V) Max. Capacity:262 mm (brick) | 162 mm (reinforced concrete) Type:Dry drilling (reinforced concrete) | Dry drilling (brick)
Dry Diamond Core Drill Motors DM51D, DM51P DM51D, DM51P OPERATING INSTRUCTIONS Mounting the core bit CAUTION: Ensure that the threads of the spindle and the core bit match. Attempting to mount mismatched threads will result in damage to both threads. Ensure both the core bit and the machine spindle are clean. Any debris could cause excessive run-out of the mounted core bit. Excessive run-out can cause premature failure of the core bit and/or a safety hazard. Tighten the bit to the spindle using two wrenches. Choosing the correct core bit for the job: Ensure that the bit you are using is suitable for the material you are drilling. There are two main types of diamond core bit: Dry type diamond core bits and wet type-sintered (impregnated) diamond core bits. This machine should only use Dry type bits: Dry type core bits are suitable for less hard materials. They tend to work well with softer, abrasive materials like brick. Only dry type bits are suitable for use with soft percussion function. Water should always be used to cool and lubricate the bit and to flush out abrasive particles formed while SPECIAL INSTRUCTIONS FOR DRY DRILLING: (Dry drilling models only) Dry drilling is a different process from wet drilling. It is more of a cutting process and you must use a much lighter touch. When dry drilling, you must not push too hard. Allow the tool to work at its own pace. Dry drilling is normally done in softer materials. Note that in very hard materials it may not be possible to drill dry. Features 1. Single speed gearbox with clutch. 2. Electronic motor management with soft start, overl oad and thermal protection. 3. Horizontal spirit level for precise alignment. 4. Switchable soft percussion for optimized dry drilling. 5. Side handle in-line with spindle centerline for best control. Light, compact, high efficiency 1800 W coring motors for dry drilling up to 112 mm. Single speed gearbox with clutch. Electronic motor management with soft start, overload and thermal protection. Horizontal spirit level for precise alignment. Switchable soft percussion for optimized dry drilling. Side handle in-line with spindle centerline for best control. Power:1800 W Max. Capacity:Dry: 112 mm Type:Dry drilling (brick)
High Speed Tile Core Drills TC20, TC40, TC402 TC20, TC40, TC402 Wet or dry tile core drills specially designed for core drilling either blind or through holes in tiles, ceramics, porcelain, stone, concrete, masonry, glass and similar materials. Quick-release spindle for easy clearing of cores. Pressurized Water Tank (Optional) Quick-Release Spindle Suction Centering Guide Power:650 W Max. Capacity:20 - 40 mm Type:Wet or Dry
High-Frequency Brushless Diamond Core Drilling Motor DM20 DM20 The only PMSM core drilling motor on the market using PMSM Technology for the highest performance and 90% efficiency. Water-cooled, high frequency PMSM motor has the highest output efficiency of any single phase coring motor on the market at 90%. Outstanding performance with large diameters up to 500 mm. The Rebar Assist mode makes it much easier to handle embedded steel while drilling. When rebar is encountered, press the Rebar Assist button, once the steel is passed, press the button again to resume normal drilling mode. LED display gives bit diameter, as well as mode display, service indicator, hours counter, and error codes. The separate LED Load Indicator, gives reliable information on load and thermal conditions. High Frequency Converter is integrated into the unit, so you can just plug it into the 230 V single phase supply and start drilling! The Bit Threading function makes threading on large bits much easier. Simply align the spindle with the bit, press the button once, and it will automatically rotate at low speed to thread the bit on. Press the button once again to stop. 17 Speed settings are easy to select, and can be adjusted on the fly. Device keeps memory of the most recent speed setting whenever it's plugged in. Power:16 A, 3700 W (230 V) Max. Capacity:Ø 500 mm (20") Type:Wet Drilling (reinforced concrete)
Rig-Mounted Diamond Core Drill Motor DM14 DM14 Features Sturdy 3 speed and 4 speed Gear Box with oil bath lubrication and mechanical clutch. Advanced Electronic Control with soft-start, thermal protection, and overload protection. Surge Function lets the operator easily know that the motor is near overload conditions by pulsing the motor without actually tripping out. Slow-Start function, a unique automatic hole starting function that reduces motor speed for a short time to allow the kerf to be started. LED indicator for optimizing drilling efficiency with overload and overheat warning. Aluminum housing for better cooling and durability. Anti-seize ring to keep core bits from getting stuck on the spindle. Quick-replaceable water seals. Electrical connection The network voltage must conform to the voltage indicated on the tool name plate. Under no circumstances should the tool be used when the power supply cable is damaged. A damaged cable must be replaced immediately by an authorized Customer Service Center. Do not try to repair the damaged cable yourself. The use of damaged power cables can lead to an electric shock. A high efficiency 4 speed, 3500 W motor with Aluminum body, optimized for a wider range of optimum drill sizes in one tool. Sturdy 3 speed and 4 speed Gear Box with oil bath lubrication and mechanical clutch. Advanced Electronic Control with soft-start, thermal protection, and overload protection. Surge Function lets the operator easily know that the motor is near overload conditions by pulsing the motor without actually tripping out. Slow-Start function, a unique automatic hole starting function that reduces motor speed for a short time to allow the kerf to be started. LED indicator for optimizing drilling efficiency with overload and overheat warning. Aluminum housing for better cooling and durability. Anti-seize ring to keep core bits from getting stuck on the spindle. Quick-replaceable water seals. Power:3500 W /16 A (220 V) | 2800 W / 25 A (110 V) Max. Capacity:350 mm Type:Wet drilling
Wet (Diamond) / Dry Drilling Motor Series DMC6P, DMC6D, DM6P, DM6D DMC6P, DMC6D Series: A heavy duty 3-speed 2200 W wet and dry drilling motor for drilling up to 162 mm in wet, and 202 mm in dry. Featuring all metal construction for optimized cooling, durability, and maximum strength. Magnesium alloy construction for optimized cooling, durability, and light weight. Smart electronic motor management with soft-start, overload and thermal protection. Three-speed oil bath gearbox with clutch. Side handle in-line with spindle centerline for best control. LED Indicator clearly indicates load conditions. Water supply kit with quick-release water hose adaptor. Anti-seize ring to keep core bits from getting stuck on the spindle. Vertical level and horizontal level for precision. Power:2200 W (230-240 V) | 2000 W (220 V) | 1700 W (110-120 V) Max. Capacity:Wet: 162 mm Type:Wet drilling | Dry drilling Weight:1.2kg DM6P, DM6D Series: A heavy duty 3 speed 2200 W wet drilling motor for wet drilling up to 162 mm. Featuring magnesium construction for optimized cooling, durability, and maximum strength. Magnesium alloy construction for optimized cooling, durability, and light weight. Smart electronic motor management with soft-start, overload and thermal protection. Three-speed oil bath gearbox with clutch. Side handle in-line with spindle centerline for best control. LED Indicator clearly indicates load conditions. Water supply kit with quick-release water hose adaptor. Anti-seize ring to keep core bits from getting stuck on the spindle. Vertical level and horizontal level for precision. Power:2200 W (230-240 V) | 2000 W (220 V) | 1700 W (110-120 V) Max. Capacity:Wet: 162 mm | Dry: 182 mm Type:Wet drilling
Wet Diamond Core Drill Motor DM8P DM8P A heavy duty 3 speed 2500 W wet drilling motor for drilling up to 202 mm. Featuring constant speed electronics for even drilling speed and longer core bit life. High output motor with Constant Speed Electronics. Smart Electronic Control with soft-start, thermal protection, and overload protection. 3-speed oil bath gear box with clutch. Highly visible LED load indicator for optimizing drilling efficiency. Anti-seize ring to keep core bits from getting stuck on the spindle. Power:2500 W (220 V) | 2200 W (110 V) Max. Capacity:202 mm Type:Wet drilling
Wet/Dry Diamond Core Drill Motor DMC160 DMC160 A 3-speed 2200 W wet and dry drilling motor for drilling up to 162 mm in wet, and 202 mm in dry. An excellent choice for an all-around tool for many tasks. 3 Speed Gear Box with clutch. Smart Electronic Control with soft-start, thermal protection, and overload protection. Highly visible LED indicator for optimizing drilling efficiency with overload and overheat warning. Hall Effect Switch is completely waterproof and dustproof. Anti-seize ring to keep core bits from getting stuck on the spindle. Side Handle in-line with spindle centerline for best control. Built in horizontal level for precision. ‍ Power:2200 W (230-240 V) | 2000 W (220 V) | 1700 W (110-120 V) Max. Capacity:Dry: 202 mm | Wet: 162 mm Type:Wet drilling | Dry drilling